Pexels / Pixabay

An automated watering system for outdoor plants makes life much easier, and also saves you lots of time. It’s additionally very simple to mount your own, and doesn’t take much time (it’s totally worth every 2nd!). Follow these easy detailed guidelines to set up a Do It Yourself drip watering system for potted plants.

How To Set Up A DIY Drip Irrigation System For Potted Plant Kingdoms

rawpixel / Pixabay

We have a location behind our house that obtains complete sunlight that I always assumed would be excellent for growing, however it’s under the eaves of your home so it doesn’t obtain much water.

My spouse put a couple of pots of peppers there in 2014, yet sprinkling every one of those pots ended up being a significant task in the heat of the summer. We had a drought in 2014, so we needed to water these pots a few times a day. Not enjoyable!

My husband told me he intended to line the location with pots of peppers this year, so we chose to try including a drip irrigation system to make sprinkling potted plants simple.

It ends up, placing in a Do It Yourself drip system for potted plants is just as very easy as it was to include overhanging lawn sprinklers to our greenhouse.

Plus we had several of the poly tubing left over from that task, so we had the ability to utilize that for this job– perk!

WHAT IS A DRIP WATERING SYSTEM?

Birgit_H / Pixabay

Think about a drip irrigation system as an automated watering system for pots and containers. It hooks right into your garden tube or faucet so when the water turns on, every one of your pots will obtain watered at the exact same time.

You might transform the water on by hand, or set it up on an automated timer to create a self-watering system for potted plants (believe me, leak watering timers are absolutely worth it, as well as it’s not extremely pricey to acquire on your own one!).

ADVANTAGES OF SETTING UP DIY DRIP WATERING FOR CONTAINERS

qimono / Pixabay

Mounting a drip water supply for potted plants has lots of advantages to you, and to your plants. The primary advantage is ease, and also allow me tell you, an automatic drip watering system makes container horticulture A Lot easier!

Not just do self-watering plant pots make your life much easier, however it’s far better for your plants as well, and ensures they’re getting specifically the correct amount of water.

Consistently watering plant pots not only keeps your plants delighted and healthy and balanced, it likewise assists to stop troubles like blossom end rot.

Healthy plants have less issues with bugs and diseases, and also create BUNCHES more tasty food for us !? What’s not to enjoy?

DRIP IRRIGATION PACKAGE FOR POTTED PLANTS

Couleur / Pixabay

Depending upon how many pots you have in your container yard, a drip irrigation package might be all you will need to install your whole potted plant watering system.

You can purchase a smaller sized set if you have 8 pots or less to water, or you can obtain a larger set similar to this one that will work to instantly sprinkle approximately 20 containers.

Trickle irrigation sets are a wonderful way to get started, and will certainly consist of full instructions for setting whatever up. Some kits even come with a timer.

However bear in mind that also when you start with a drip watering package, you may still require to buy a couple of additional components (for instance, a lot of kits don’t come with a stress regulator). So make sure to check out the details of what’s consisted of in the package.

Of course, you can likewise make your very own custom-made drip irrigation system design, which is what we provided for our arrangement since we already had the poly tubing and also a few other parts to obtain us began.

Do It Yourself DRIP WATERING PRODUCTS REQUIRED

Trickle irrigation package (if you intend to use it to get you started).
Mainline drip watering hose (1/2 ″ poly drip irrigation tubing).
Trickle irrigation backflow preventer.
Garden hose pipe adapter (1/2 ″ faucet tube suitable).
Pressure regulator.
Poly tubes end cap.
Watering micro tubes (1/4 ″ plastic micro tubing).
Watering drippers with spikes, one for each and every pot (we made use of these 360 degree flexible drippers).
Drip watering opening strike.
Leak line connectors.
Drip watering spikes (1/2 ″ tubes stakes).
Trickle tube goof plugs (just in case).
Garden watering timer for drip irrigation.
Yard tube splitter (optional, is available in handy if you intend to hook up one more hose pipe to the very same faucet).
PVC pipeline cutting saw or a PVC cutting tool (for reducing the poly tubes).
Tape measure.
HOW TO MOUNT DRIP WATERING FOR POTTED PLANTS.
Step 1: Affix connectors to tap, tube or spigot– It’s much easier to hook everything in if you attach the connectors to your hose pipe or spigot initially. So order the backflow preventer, the stress regulator, as well as the faucet tube installation for this action.

Begin by affixing the irrigation heartburn preventer onto your tube or faucet spigot (it just screws on). Next, you’ll attach the pressure regulator, and last the tap pipe suitable (this simply screws on also– no devices needed!).

Primarily you’ll wind up chaining the yard hose accessories with each other, in this precise order (heartburn preventer, pressure regulator, tap pipe fitting).

Action 2: Affix the 1/2 ″ poly tubes to the hose fitting– Take one end of your 1/2 ″ poly mainline tubes as well as press it right into the open end of the tap pipe fitting. Once you’ve pushed it in, take down the collar on the pipe fitting piece, as well as tighten it to secure the tubes.

You might intend to kink the tubes as well as activate the water to ensure there’s no dripping at this moment, otherwise you can wait to evaluate whatever in the future symphonious 7.

Action 3: Figure out your drip watering system layout– The next drip system installation step is to determine exactly how far apart the drip heads will certainly be, so you know precisely where to set up the mini tubing.

Determining the drip irrigation layout appears tough, yet it was actually really easy.

We just laid out the pots where we wanted them to be, and then put down the poly tubing pipe before them (Tip: let the poly tubing sit in the sun for some time to heat up first, it’s much easier to lay it level when it’s warmed up).

Then we determined where each pot was, and also marked the poly tubing where we needed to include the drip tube lines for each of the drippers.

As soon as we determined all of it out, we cut the poly tubing at the actual end making use of using our PVC reducing device (you can utilize a PVC pipeline reducing saw to reduce the tubing rather), as well as topped television with the poly tubes end cap.

Step 4: Figure out the length of time the drip lines will certainly be– Next we measured the length of time each piece of the mini tubing needed to be for the drip lines.

That’s merely the length from the spot you noted on the mainline poly tubes, as much as the place where the drip head will certainly be inside the pot.

Pexels / Pixabay

We included a number of added inches to the length of each piece of the mini tubing so it would be loose sufficient to allow space for us to move the pots around a bit if we intended to (which we have, and it exercises truly well).

Step 5: Mount the watering mini tubes– It’s very easy to include the drip lines (micro tubes) and also the micro sprinkler heads.

For drip line setup you merely punch a hole in the mainline poly tubing (making use of the drip watering opening punch) where you want to add the mini tubing drip lines (these are the areas you noted on the tubes in step 3).

Don’t panic if you punch an opening in the incorrect area. I understand that making a mistake isn’t perfect, yet if you do wind up punching a hole in the wrong spot … well, that’s why they make goof connects! It’s excellent to have them available simply in case.

Following you’ll connect the drip line connector initially to the main line tube, then attach the micro tubes drip tube onto the other end of the adapter.

Boom!

Action 6: Set up the irrigation drippers– Setting up the dripper heads is incredibly easy too. You primarily simply plug them into the open end of the micro tubes, and then put them into your container.

Our dripper mini heads came with spikes to hold them in position, so they remain where we placed them.

We focused the mini heads in each of our pots, simply away of the base of the plant( s). Take care not to harm any kind of tender origins or seedlings when your pressing the irrigation increases right into the dirt though.

Action 7: Examine out your watering setup– Prior to burying the poly tubes, examination whatever bent on make sure it’s all dealing with no leaks. You absolutely do not want anything dripping.

At this point it’s also an excellent suggestion to change the drip heads. The tops of the heads turn so you can regulate the amount of water that comes out.

We adjusted every one to ensure they weren’t spraying outside the pots, which they were all working appropriately.

Tip 8: Safeguard the poly tubing– Once every little thing was mounted and also examined, we protected the main line poly tubing right into the ground with some 1/2 ″ drip watering tubing stakes.

The risks clip onto the primary line poly tubing, which makes protecting the tubes simple. Then we merely buried the tubing in the compost to provide it a cleaner look.

Keep in mind, you can mount your poly tubing behind your pots rather than before them like we did right here.

In this way, the micro tubing will run up the backs of the pots, and will not be so evident.

Yet it’ll function simply great either way. (We simply installed ours ahead to make it easier to take pictures for you).

Tip 9: Set the timer for automated watering– Last, we established the timer on our hose yard watering timer to work on a timetable so we never need to worry about sprinkling these pots once more (which is especially good for watering plants while we get on vacation!).

As soon as your automated drip irrigation system is running, I recommend looking at your pots on a regular basis to make sure they are getting the correct amount of water. Then you can readjust your timer accordingly to get it perfect.

We’ll turn the drip irrigation timer off when we get a great deal of rainfall, and also increase the length or how typically the drippers run during completely dry periods.

Not just is this DIY drip irrigations system terrific so we do not need to water these pots, however it makes it much easier to guarantee our peppers and tomatoes are obtaining a consistent quantity of water.

Ideally this will certainly aid prevent bloom end rot, which was a problem for our container grown peppers in 2014. Drip watering systems are great for containers, as well as the garden.

I know it appears like there are a great deal of steps entailed with drip irrigation installment, yet trust me it actually is really simple! Think me, if I can do it, anyone can!